Important Safety Instructions; Power On/Off Cautions - Epson AcuLaser C4000 Reference Manual

Important Safety Instructions

Connect your printer to an electrical outlet that meets the
power requirements of this printer. Your printer's power
requirements are indicated on a label attached to the printer.
If you are not sure of the power supply specifications in your
area, contact your local power company or your dealer.
If you are unable to insert the AC plug into an electrical outlet,
contact an electrician.
Adjust only the controls mentioned in the manual. Adjusting
other controls can damage your printer.
E S
NERGY TAR Compliance
®
S
TAR Office Equipment Program is a voluntary partnership
with the computer and office equipment industry to promote the
introduction of energy-efficient personal computers, monitors,
printers, fax machines, copiers, and scanners, in an effort to
reduce air pollution caused by power generation.

Power On/Off Cautions

Do not turn off the printer under the following conditions:
For at least 30 seconds after turning on the printer. Wait until
While the Ready light is flashing.
4
As an International
Partner, EPSON has determined that this
product meets the International
S
TAR
efficiency.The International
appears on the LCD panel.
E
®
Program guidelines for energy
S
NERGY TAR
E
NERGY
E
NERGY
®