Epson AcuLaser C4000 Reference Manual page 185

Menu
4 9
AUX Menu* *
LJ4 Menu
GL2 Menu
4
PS3 Menu*
ESCP2 Menu
FX Menu
I239X Menu
*1 This item appears only when the jobs are stored by using the Quick Print Job feature.
*2 This item appears only when Form Overlay data exists.
*3 This item appears only when the Network I/F setting in the Emulation Menu is
*4 These items appear only when the corresponding options are installed.
*5 This Item appears only when there is print job data stored in the printer's Hard Disk
Drive to be printed by using the Quick Print Job Menu.
*6 This Item appears only when there is print job data stored in the printer's Hard Disk
Drive to be printed by using the Confidential Job Menu.
*7 Available only when Network Config is set to
*8 When Get IPAddress is set to
GW Byte4 are not available. Their default values will be used.
*9 The settings are activated after turning the printer off and then on.
*10The item appears when the appropriate font setting is selected.
Items
AUX I/F, AUX Config, Get IPAddress, IP Byte1, IP
Byte2, IP Byte3, IP Byte4, SM Byte1, SM Byte2, SM
Byte3, SM Byte4, GW Byte1, GW Byte2, GW Byte3,
GW Byte4, NetWare, AppleTalk, NetBEUI, AUX Init,
Buffer Size
FontSource, Font Number, Pitch*
Symset, Form, Source Symset, Dest Symset, CR
Function, LF Function, Tray Assign
GLMode, Scale, Origin, Pen, End, Join, Pen0 to Pen6
Error Sheet, Coloration, Image Protect
Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
Font, Pitch, Condensed, T.Margin, Text, CGTable,
Country, Auto CR, Auto LF, Bit Image, ZeroChar
Font, Pitch, Code Page, T.Margin, Text, Auto CR, Auto
LF, Alt. Graphics, Bit Image, ZeroChar, CharacterSet
, all items between and including IP Byte1 and
Functions of the Control Panel
10 10
, Height*
.
6
6
,
6
6
6
6
6
.
6
6
6
6
6
173