Usb Menu - Epson AcuLaser C4000 Reference Manual

Speed
Specifies the pulse width of the ACKNLG signal when receiving
data in the Compatibility mode or Nibble mode. When
selected, the pulse width is about 1 s. When
the pulse width is about 10 s.
Bi-D
Allows you to specify the bidirectional communication mode.
When you select
Buffer Size
Determines the amount of memory to be used for receiving data
and printing data. If
allocated for receiving data. If
is allocated for printing data.
Note:
To activate Buffer Size settings, you must turn off the printer for
more than five seconds then turn it back on. Or, you can perform a
Reset All operation, as explained in "Reset Menu" on page 188.
Resetting the printer erases all print jobs. Make sure the Ready
light is not flashing when you reset the printer.

USB Menu

These settings control communication between the printer and
the computer when using the USB interface. These settings are
activated after turning the printer off and then on.
Item
USB I/F
Buffer Size
190 Functions of the Control Panel
, bidirectional communication is disabled.
is selected, more memory is
Settings (default in bold)
On, Off
Normal, Maximum, Minimum
is selected,
is selected, more memory
is