Encore ENHWI-2AN3 User Manual page 45

Static IP Address – Manually configure WAN port IP address,
contents of this are:
o My IP Address : This is the WAN port IP address
provided by your ISP to establish the L2TP tunnel.
o My Subnet Mask : This is the WAN port Subnet Mask
provided by your ISP to establish the L2TP tunnel.
o Gateway IP Address : This is the WAN port Gateway
IP address provided by your ISP to establish L2TP
tunnel.
o DNS : This is optional. This is the WAN port DNS
address provided by your ISP to resolve the website IP
Address into the domain or URL name during
establishing L2TP tunnel if you use domain name in
"Service IP/Name" instead of IP address .
L2TP Settings :
Login : Enter the L2TP username assigned by your ISP
Provider.
Password : Enter the L2TP password assigned by your ISP
Provider.
Service IP/Name : Enter the L2TP server IP address or
domain name.
MTU : What would you select would be the maximum size of
packets. Keep it in default if you are not familiar with this
setting.
Type :
o Keep Connection - stay connected to the Internet
o Automatic Connection - automatically connects to the
Internet when an application needs it, and drops the
connection after the designated idle time period.
o Manual Connection – manually connect and
disconnect to the internet by the user
Idle Timeout : This function is available only if Automatic
Connection is selected under "Type". This is a maximum period of
time for which the Internet connection is maintained during
inactivity. If the application is inactive for certain time designated
here the internet connection will be automatically dropped.
ENHWI-2AN3 User's Manual
Web Site – www.encore-usa.com
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
45