Table of Contents
Advertisement
•
Select the "General" tab.
ENHWI-2AN3 supports DHCP Server, select both "Obtain an IP address
automatically" and "Obtain DNS server address automatically"
IX - Power up the ENHWI-2AN3
Connect the supplied power-adapter to the power port and then plug it to a wall
power outlet. The ENHWI-2AN3 automatically enters and run the self-test phase
in just a few seconds. The Power LED will light a steady red light indicating that
the ENHWI-2AN3 is ready for operation.
X - Smart Wizard
Before you start the ENHWI-2AN3 router's Smart Wizard, check the followings:
•
Internet connection should be running & ready to use (ADSL or cable modem).
•
xDSL Modem or Cable Modem must have an RJ-45 LAN port
ENHWI-2AN3 User's Manual
Encore Electronics Inc.
Tel – (626) 336-4567
Fax – (626) 336-2345
Web Site – www.encore-usa.com
11
Hide quick links:
Advertisement
Table of Contents
