Restart With Current Settings - Cabletron Systems DIGITAL VNswitch 900CC Installation And Configuration Manual

[2] Restart with Current Settings

This option resets the module but leaves the module's configured nonvolatile
configuration storage parameters at their current values.
Allow approximately 1 minute for the module to restart.
The following example shows the dialog associated with this option:
VNswitch 900CC
=============================================================

RESTART WITH CURRENT SETTINGS

This selection will reset your system with the current
configuration settings.
=============================================================
Press Y to confirm [N] :
Press Return for Main Menu...
Configuring the Module in a DEChub ONE or DEChub ONE-MX
[2] Restart with Current Settings
NOTE
<Return>
4-5