Digital depth
Water Temp
Bottom signal
Depth range
at bottom of
depth scale
Opening screen, Full Chart page, or mode. The factory default setting
Full Chart
The unit's default page, Full Chart shows all echoes scrolling across the
full screen. The bottom signal scrolls across the screen from right to
left. The line at the top of the screen represents the surface. The bottom
depth — determined by the digital sonar — shows in the upper left
corner.
If the transducer with a built-in temperature sensor is connected, a
digital display for water temperature also will be shown. This tempera-
ture display can be turned on and off.
Depth Range
When turned on, the unit automatically adjusts the depth range ac-
cording to water conditions. When in auto range mode, it always keeps
the bottom displayed in the lower portion of the screen. You can over-
ride the automatic depth range control and manually select a depth
range.
To do this, repeatedly press
Press
to select
↓
menu. Use the arrow keys to select a desired depth range. When you
are finished, press
has the Fish I.D. (fish symbols) turned on.
, then press
M
ANUAL
to clear the menu from the display.
PWR
until the
MENU
MENU UP
38
Surface signal
Fish symbols
Structure
or cover
Grayline
menu appears.
D
R
EPTH
ANGE
to display the
R
S
ANGE
IZE