Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Hardware Installation Manual page 63

Numerics
The 10-Mbps baseband Ethernet specification that uses two pairs of twisted-pair
10BASE-T
cabling (Category 3 or 5): one pair for transmitting data and the other for
receiving data.
B
Basic Rate Interface. An ISDN interface composed of two bearer channels
BRI
(B channels) and one data channel (D channel) for circuit-switched
communication of voice, video, and data.
C
A Windows 95–, Windows 98–, and Windows NT–based software tool that ships
Cisco 800 Fast Step
Application with the Cisco 800 series routers for basic configurations and verification of the
router software configuration. It also monitors the status of the ISDN interface,
error detail, and usage statistics.
A cable that wires a pin to its opposite pin; for example, RX+ is wired to TX+.
crossover Ethernet
cable This cable connects two similar devices, for example, two data terminal
equipment (DTE) devices or two data communications equipment (DCE)
devices.
D
Dynamic RAM that stores information in capacitors that must be refreshed
DRAM
periodically.
E
78-5373-04
G L O S S A R Y
Cisco 800 Series Routers Hardware Installation Guide
GL-1