Problems During First Startup - Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Hardware Installation Manual

Problems During First Startup

Problems During First Startup
Table 3-1
Table 3-1 Problems During First Startup
Symptom Problem
All LEDs, No power to
including OK router.
LED, are off.
Cisco 800 Series Routers Hardware Installation Guide
3-2
lists problems that could occur after you turn on the power switch for the first time.
Solutions
Perform the following steps in the following order:
Make sure that the power switch is ON.
•
• Make sure that all connections to and from the power
supply are securely connected.
Make sure that the power outlet has power.
•
• If the problem continues, the router might have a faulty
power supply. Contact your Cisco reseller.
Chapter 3 Troubleshooting
78-5373-04