Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Hardware Installation Manual page 29

Chapter 2 Installation
Table 2-2 Connecting Ethernet Devices (continued)
Network Device
Connected to Router Router Port
Server, PC, or Cisco 801 and 802
workstation routers: Ethernet port
Cisco 803 and 804
routers: Ethernet port Ø
Server, PC, or Cisco 802 IDSL router:
workstation Ethernet port
Cisco 804 IDSL router:
Ethernet port 1
Server, PC, or Cisco 803 and 804
workstation routers:
Ethernet ports 1, 2, 3
Server, PC, or Cisco 804 IDSL router:
workstation Ethernet ports 2, 3, 4
1. Cisco provides a yellow straight-through cable. You provide crossover or additional straight-through cables. For details on
cables, refer to Appendix B, "Specifications and Cables."
2. Hub vendors choose different names for the button controlling cable selections. This table uses the Cisco 1528 Micro Hub
10/100 with an MDI/MDI-X button as an example. Determine the button name and setting for your particular hub. Refer to
your hub documentation for details.
3. On Cisco 803 and Cisco 804 routers, the HUB/NO HUB button affects only Ethernet port Ø.
4. On Cisco 804 IDSL routers, the TO HUB/TO PC button affects only Ethernet port 1.
78-5373-04
Router HUB/NO
HUB, TO
Ethernet Cable HUB/TO PC
1
Type Button Setting
Straight-through OUT
Straight-through OUT
3
Straight-through N/A
4
Straight-through N/A
Cisco 800 Series Routers Hardware Installation Guide
Installing Your Router
Network
Device
Button
2
Setting
N/A
N/A
N/A
N/A
2-7