Preventing Router Damage; Unpacking Your Router; Preinstallation Activities - Cisco 888 G.SHDSL Router with 3G - 888 G.SHDSL Router Hardware Installation Manual

Preventing Router Damage

Preventing Router Damage
Use the following guidelines when connecting devices to your router:
•
•
•
Warning If the symbol of suitability with an overlaid cross (
port to a public network that follows the European Union standards. Connecting the port to this type
of public network can cause severe injury or damage your router.

Unpacking Your Router

Table 2-1
the box that your router came in. If any of the items is missing or damaged, contact your customer service
representative.
Table 2-1
•
•
•
•
•
•
•
•
•

Preinstallation Activities

Before you begin installing your Cisco 800 series router, perform the following steps:
Order an ISDN BRI line from your telephone service provider. For more information, refer to the Cisco
Step 1
800 Series Routers Software Configuration Guide.
If you have a Cisco 801 or Cisco 803 router, do the following:
Step 2
Cisco 800 Series Routers Hardware Installation Guide
2-4
Connect the color-coded cables supplied by Cisco Systems to the color-coded ports on the back
panel.
If you must supply your own cable, see the
"Specifications and Cables." If this appendix does not provide specifications for a particular cable,
we strongly recommend ordering the cable from Cisco Systems.
If the symbol of suitability ( ) appears above a port, you can connect the port directly to a public
network that follows the European Union standards.
lists the items that come with your router. All these items are in the accessory kit that is inside
Router Box Contents
Power cord (black)
Desktop power supply
Console cable (light blue)
DB-9-to-RJ-45 adapter for use with light blue console cable
ISDN ST cable (orange) (Cisco 801 and 803 routers)
Ethernet cable (yellow)
ISDN U or IDSL cable (red) (Cisco 802, 802 IDSL, 804, and
804 IDSL routers)
RJ-45-to-RJ-11 adapter cable for use with red ISDN U cable
Product documentation
"Cabling Specifications" section in Appendix B,
) appears above a port, you must not connect the
Chapter 2 Installation
78-5373-04