Required Tools And Equipment - Cisco 1605-R How To Use Manual

Installing WAN and Voice
Interface Cards in a Cisco
Modular Router
This chapter describes how to install WAN and voice interface cards in Cisco 3600 series,
2600 series, 1600 series, and Cisco 1720 modular routers, and contains the following
sections:
•
Required Tools and Equipment on page 2-1
•
Installing a Network Module in a Cisco 3600 Series or Cisco 2600 Series Router on
page 2-2
•
Before Installing a Voice Interface Card on page 2-5
•
Installing a WAN or Voice Interface Card in a Network Module or Chassis Slot on page
2-6
•
Installing a WAN Interface Card in a Cisco 1720 Router or Cisco 1600 Series Router on
page 2-9

Required Tools and Equipment

In addition to the WAN interface card and the router, you need the following items to install
and connect your card:
•
Number 2 Phillips screwdriver.
•
Appropriate connecting cable—The cable type required for each card is described in the
section for that card. For more information on the types of cables that can be used with
the cards, See the online document Cisco Modular Router Cable Specifications on the
Documentation CD-ROM that accompanied your router package, or on Cisco
Connection Online.
Installing WAN and Voice Interface Cards in a Cisco Modular Router 2-1
C H A P T E R 2