Cisco 1605-R How To Use Manual page 45

User guide
Hide thumbs Also See for 1605-R:
Table of Contents

Advertisement

Follow this procedure to install the WAN interface card in the router:
On the Cisco 1720 router, turn the power switch to the STANDBY position, and
Step 1
disconnect the power cable from the power socket on the rear panel.
On a Cisco 1600 series router, turn OFF power to the router. However, to channel
ESD voltages to ground, do not unplug the power cable.
Remove all network interface cables, including telephone cables, from the rear
Step 2
panel.
Use either a number 2 Phillips screwdriver or a small flat-blade screwdriver to
Step 3
remove the filler panel from the WAN interface card slot. (See
Figure 2-7.) Save the filler panel for future use.
Installing WAN and Voice Interface Cards in a Cisco Modular Router 2-11
Inserting the Card in the Router

Advertisement

Table of Contents
loading

This manual is also suitable for:

364036201601160216031604 ... Show all

Table of Contents