Cisco 1605-R How To Use Manual page 64

User guide
Hide thumbs Also See for 1605-R:
Table of Contents

Advertisement

1-Port ISDN BRI S/T Leased-Line Card
Figure 3-16
Connecting the ISDN BRI S/T Leased-Line Card to the Network
You must provide an RJ-45-to-RJ-45 cable and an external NT1 for this connection.
Note
ISDN BRI S/T leased-line port.
Take the following steps to connect the ISDN cables:
Step 1
Step 2
Step 3
Step 4
3-16
Cisco WAN Interface Cards Hardware Installation Guide
ISDN BRI S/T Leased-Line Card—Front Panel
ISDN BRI port
SEE MANUAL BEFORE INSTALLATION
B1 LED B2 LED
OK LED
Turn the router OFF before making cable connections to the WAN interface card
Confirm that the router is still turned OFF.
Connect one end of the RJ-45 cable to the card's ISDN BRI leased-line port.
Connect the other end of the cable to the NT1, as shown in Figure 3-17.
Connect the NT1 to the ISDN wall jack according to the documentation that
came with the NT1.
BRI
S/T
LL

Advertisement

Table of Contents
loading

This manual is also suitable for:

364036201601160216031604 ... Show all

Table of Contents