Cisco 1605-R How To Use Manual page 72

Voice Interface Cards
Figure 3-22
VIC
FXS
Connecting the 2-Port FXS Card
Use a standard RJ-11 modular telephone cable to connect this card to a telephone or fax
machine.
Note
Step 1
Step 2
Step 3
Caution
telephone network.
3-24 Cisco WAN Interface Cards Hardware Installation Guide
2-Port FXS Card Front Panel
1
SEE MANUAL BEFORE INSTALLATION
Ports on this interface card are color-coded gray.
Confirm that the router is still turned OFF.
Connect one end of the cable to an RJ-11 port on the card. (See Figure 3-23.)
Connect the other end to the RJ-11 port on the telephone or fax machine.
Do not connect an FXS interface directly to the public switched
0