Cisco 1605-R How To Use Manual page 80

Voice Interface Cards
Table 3-6
Network
Module
Connecting the 2-Port ISDN BRI Card
Step 1
Step 2
Step 3
Caution
BRI connector only, and not to any other RJ-45 connector.
3-32 Cisco WAN Interface Cards Hardware Installation Guide
Voice Interface Card Configurations (continued)
Slot Voice Interface Card
1 Analog voice interface card
0 Analog voice interface card
1 VIC-2BRI-S/T-TE
Confirm that the router is still turned OFF.
Connect one end of a straight-through RJ-45-to-RJ-45 cable to the card's RJ-45
port. (See Figure 3-30.)
Connect the other end to the RJ-45 wall outlet.
To prevent damage to the router, be sure to connect the BRI cable to the
Port Status
0 Down
1 Down
0 Up
1 Up
0 Up
1 Down