Download  Print this page
   

Advertisement

Cisco 1601−R Router Cable Specifications
Document ID: 46783
Introduction
Prerequisites
Requirements

Components Used

Conventions

Cabling Specifications

Console
Ethernet
Synchronous/Asynchronous Serial
WAN Interface Cards
Front Panel LEDs
Rear Panel LEDs
Related Information
Introduction
This document provides the cabling specifications for the Cisco 1601−R router.
Prerequisites
Requirements
There are no specific requirements for this document.
Components Used
The information in this document is based on the hardware version:
Cisco 1601−R Router
The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.
Conventions
For more information on document conventions, see the Cisco Technical Tips Conventions.
Cabling Specifications
The Cisco 1601−R router has one Ethernet interface, one Serial interface, and one WAN interface card (WIC)
slot.

Advertisement

Table of Contents

   Related Manuals for Cisco 1601

   Summary of Contents for Cisco 1601

  • Page 1: Components Used

    Conventions For more information on document conventions, see the Cisco Technical Tips Conventions. Cabling Specifications The Cisco 1601−R router has one Ethernet interface, one Serial interface, and one WAN interface card (WIC) slot.
  • Page 2 The console cable is a rolled RJ−45 , the CAB−1600−CON=. Ethernet On the 1601−R router, there is one functional port for either the 10Base−T (RJ−45) or AUI (DB−15). The cable details are the CAB−ETH−S−RJ45= Yellow Cable for Ethernet, Straight−through, RJ−45, 6 ft Synchronous/Asynchronous Serial On the 1601−R router, there is one DB−60 Synchronous/Asynchronous serial port.
  • Page 3: Front Panel Leds

    WIC−1B−S/T: 1 ISDN BRI S/T WIC−1B−U: 1 ISDN BRI U with integrated NT−1 Front Panel LEDs The table below shows the front panel LED functions for the Cisco 1601 and Cisco 1602 routers. Color SYSTEM The router is on, and DC power is being Green supplied.
  • Page 4 An alarm condition exists on the Yellow DSU/CSU port. connection on the DSU/CSU port. The Cisco 1601 serial port is sending or receiving data. The Cisco 1602 DSU/CSU port is sending or receiving data. The serial WAN interface card has an active connection on the serial port.
  • Page 5: Related Information

    Technical Support − Cisco Systems Contacts & Feedback | Help | Site Map © 2008 − 2009 Cisco Systems, Inc. All rights reserved. Terms & Conditions | Privacy Statement | Cookie Policy | Trademarks of Cisco Systems, Inc. Updated: Jul 07, 2005...

This manual is also suitable for:

1601−r

Comments to this Manuals

Symbols: 0
Latest comments: