Tait TM9300 Series Installation Manual
Dmr mobile radios, p25 mobile radios
Hide thumbs
Also See for TM9300 Series:
- User manual (150 pages) ,
- Installation manual (46 pages) ,
- Quick start manual (10 pages)
Subscribe to Our Youtube Channel
Related Manuals for Tait TM9300 Series
Summary of Contents for Tait TM9300 Series
- Page 1 TM9300 DMR Mobile Radios TM9400 P25 Mobile Radios Installation Guide MMB-00002-09 · Issue 9· May 2021...
- Page 2 Tait International Limited. waste stream when its service life is over. For more information about how to dispose of your unwanted The word TAIT and the TAIT logo are trademarks of Tait product, visit the Tait WEEE website at Tait International Limited.
-
Page 3: Table Of Contents
Installing the Antenna ..........37 TM9300/TM9400 Installation Guide © Tait International Limited May 2021... - Page 4 Tait General Software Licence Agreement ........
-
Page 5: Preface
■ dual control head installation ■ hand-held control head installation ■ desktop installation ■ refer to “Installation Options” on page 13 and the installation instructions provided with the equipment. TM9300/TM9400 Installation Guide Preface © Tait International Limited May 2021... -
Page 6: Associated Documentation
Technical notes are published from time to time to describe applications for Tait products, to provide technical details not included in manuals, and to offer solutions for any problems that arise. Technical notes are available in PDF format from the Tait support website. -
Page 7: Publication Record
Information added about using an analog channel to check TM9300 forward and reflected power November 2013 Hand-held control head added Caution about using Y-type breakout cable added December 2012 TM9400 added. September 2012 First release. TM9300/TM9400 Installation Guide Preface © Tait International Limited May 2021... -
Page 8: Document Conventions
This symbol highlights information that is relevant to radios with a transmit power of 30-50W. This symbol highlights information that is relevant to radios with a transmit power of 25W. This symbol highlights information that is relevant to dual body radios. TM9300/TM9400 Installation Guide Preface © Tait International Limited May 2021... -
Page 9: Safety And Regulatory Warnings
Installation of this product in a vehicle must be performed according to the instructions provided by the vehicle manufacturer. For more information, refer to the vehicle manufacturer’s website or contact the vehicle manufacturer’s dealer. TM9300/TM9400 Installation Guide Safety and Regulatory Warnings © Tait International Limited May 2021... -
Page 10: Mpt 1362 Code Of Practice
■ If the vehicle contains such equipment, consult the vehicle manufacturer or dealer to determine whether these electronic circuits will perform normally when the radio is transmitting. TM9300/TM9400 Installation Guide Safety and Regulatory Warnings © Tait International Limited May 2021... -
Page 11: Radio Protection When Charging The Vehicle Battery
Radio Installation in Gas or Fuel Tankers Special conditions must be observed when installing a radio on gas and fuel tankers. Consult your radio provider or Tait-accredited service center for more details. Vehicles Powered by Liquefied Petroleum Gas... -
Page 12: Non-Standard Radio Installations
There must be a gap of more than 3/8 inch (10 mm) between the bottom surface of the radio chassis and the mounting surface. This is illustrated in the following diagram: 3/8 inch (10 mm) mounting surface TM9300/TM9400 Installation Guide Safety and Regulatory Warnings © Tait International Limited May 2021... -
Page 13: Installation Options
■ Some installation options may not be suitable for some models of radio. For more information, contact your regional Tait office. The standard TM9300 and TM9400 mobile platform now includes MOSFET IPN 000-03055-00 XSTR NTD3055 NMfet Dpak-3 fitted by default. - Page 14 Re-install kits allow you to remove radios from one installation and re- Re-install Kits install them at another location without having to remove the wiring from the old installation. The following kits are available: TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021...
-
Page 15: Remote Control Head
Kits for remote head installations > 20ft (6m) contain two remote cables and one control head interface box. The following diagram summarizes how the components are installed. TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021... -
Page 16: Dual Control Heads
The dual-head kits provide two complete remote heads whereas the dual- head upgrade kits provide one complete remote head and one remote control head interface which is fitted to an existing local control head. TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021... - Page 17 (up to a maximum of 750m). Refer to the T02-00062-2xxx Remote Head Extender Upgrade Kits Installation Instructions (402-00102-xx) for full TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021...
-
Page 18: Hand-Held Control Head
Ch an ne l 12 Zo ne 11 Me nu Ta lkg r microphone clip T02-00073-AAAx TMAC70 hand-held control head remote control head 8mm Allen key remote control head TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021... - Page 19 A housing unit and gasket encloses the extension cable socket, and provides additional strain relief and some protection from water and dust ingress. Refer to the T02-00009-0201/0202/0203/0204 Hand-Held Control Head Extension Kits Installation Instructions (402-00095-xx) for full details. TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021...
-
Page 20: Desktop Installation
The following diagram shows the components included in each kit. Refer to the T02-00036-AACA Power Supplies User’s Guide (MMZ-00002-xx) for full details. Tait strongly recommends to use one T02-00036-AACA power supply for each radio. This prevents any issues caused by simultaneous trans- missions. -
Page 21: External Speakers
Refer to the installation instructions (402-31432-02) provided with the speaker for full details. TM9300/TM9400 Installation Guide Installation Options © Tait International Limited May 2021... -
Page 22: Power Sense And Connector Power Supply Options
Attempting to replace SMT components without the necessary training, tools, and equipment can cause permanent damage to the radio. Figure 3.1 shows a block diagram of the hardware links LK1M to LK4M. TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021... - Page 23 LK4M for the individual power-sense options. It also lists the dependence of the power-sense options with respect to the GPI lines, which can or cannot be used. TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021...
- Page 24 LK3M in AUX GPI2 must be left floating LK3M out AUX GPI2 can be used as GPI. TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021...
- Page 25 This mode can also be activated by making an emergency call or by pressing a key that has been programmed TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021...
-
Page 26: Connector Power Supply Options
In the event of a short cir- cuit, the current folds back to protect the switch device and connectors. TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021... - Page 27 TM9300/TM9400 Installation Guide Power Sense and Connector Power Supply Options © Tait International Limited May 2021...
-
Page 28: Installing The Radio
RF power meter capable of measuring forward and reflected ■ power at the operating frequency of the radio Checking the Vehicle Before Installation Complete a pre-installation check of all vehicular functions. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... -
Page 29: Mounting And Removing The Control Head Or A Body Interface
Place one edge of the control head on either the top or bottom pair of snap features on the front of the radio body, then rotate to snap the opposite edge into place. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... - Page 30 Use the screwdriver to lift the control head off the snap feature, then repeat in the other position. The control head can now be removed from the radio body. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
- Page 31 Before installing the remote body interface to the radio body, screw the earthing tag onto one of the screw bosses on the radio chassis, as seen in the figure below. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
-
Page 32: Installing A Hand-Held Control Head
Attach the hand-held control head cord to the innermost port of the radio body with link J4 removed. The outermost port of this radio body connects to the other radio body. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... -
Page 33: Dual Body Overview
(T02-00083-Axxx) Any supported microphone (e.g. keypad microphone (T02-00005-Axxx) T02-00005-Axxx) External auxiliary interface (e.g. external alert) GPS antenna/receiver with plate mount or magnetic mount (TMAA05-0x) Inter-body grounding strap (219-03736-00) TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... - Page 34 The grounding strap is attached to each radio body by either a bottom mounting boss, or a side mounting boss. See the figure below. Figure 4.6 Inter-Body Grounding Strap Between the Radio Bodies TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
-
Page 35: Selecting The Mounting Position
■ installed an accessory is added which is not rated to IP54 (e.g. control-head ■ interface box or hand-held control head remote interface box) TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... -
Page 36: Mounting The U-Cradle
(not included). Caution Although an industrial-strength recloseable fastening sys- tem can be used to support the installation, for safety reasons Tait does not recommend this as a mounting option. Notice When mounting the radio on a surface, check whether the mounting screws will screw into material providing sufficient strength. -
Page 37: Installing The Antenna
8 inches (200mm) excess at the radio end. Terminate the free end of the antenna cable with the mini-UHF plug or BNC plug (supplied) as shown in Figure 4.8. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... - Page 38 Approximate frequency to wavelength conversion 1/4 Wavelength Band Name Frequency (MHz) Wavelength (cm) (cm) B1 (lower range) B1 (upper range) 174 H7 (lower range) H7 (upper range) 520 TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
-
Page 39: Connecting The Power Cable To The Power Source
Balanced load configuration rear view SPK+ External speaker output. Analog 25W radio Balanced load configuration 13V8 BATT DC power input for radio body and Power control head rear view TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... - Page 40 In trucks, where direct connection to the battery is often not possible, the radio can be connected to a suitable terminal inside the fuse box that is connected directly to the battery. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
- Page 41 8 inches (200 mm) excess at the radio end. Plug the power cable into the power connector of the radio. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
- Page 42 Failure to fit the correct fuses may result in fire or damage to the radio. The correct fuse types are: 30-50W radios: 20A fuses (Tait IPN 265-00010-81) ■ 25W radios: 10A fuses (Tait IPN 265-00010-80) ■...
-
Page 43: Connecting An External Speaker
Connecting an External Speaker An external speaker is connected to the speaker pins of the radio’s power connector and operates in addition to the radio’s existing internal speaker. For information about Tait external speakers refer to “External Speakers” on page If a different speaker is used, receptacles for the speaker pins of the power connector are provided with the radio’s installation kit. - Page 44 Dynamic microphones are not supported RSSI Analog RSSI output Analog +13V8 SW Switched 13.8V supply. Supply is Power switched off when radio body is switched off AGND Analog ground Ground TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
- Page 45 4 (AUX GPI3) to pin 15 (AGND) of the auxiliary connector ■ Notice The hardware links are SMT components. Do not replace SMT components unless you are trained and equipped to do so. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
- Page 46 Connect a normally open switch between the pin of the input line (pin 5 ■ for AUX GPI2) and pin 15 (AGND) of the auxiliary connector. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
-
Page 47: Installing The Radio
Position the radio in the U-cradle so that the holes in the U-cradle line up with the holes in the radio chassis. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... - Page 48 Adjust the position of the radio in the U-cradle for the best viewing angle, then tighten the thumb screws. Figure 4.10 Installing the radio in the U-cradle TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021...
-
Page 49: Installing The Microphone
Install the microphone clip in the most convenient location using the screws provided. The microphone must be within reach of the user but in such a position that the PTT (press-to-talk) key cannot be inadvertently activated or jammed. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... -
Page 50: Checking The Installation
Failure to fit the correct fuses may result in fire or damage to the radio. The correct fuse types are: 30-50W radios: 20A fuses (Tait part number 265-00010-81) ■ 25W radios: 10A fuses (Tait part number 265-00010-80) ■... -
Page 51: Checking The Vehicle After Installation
4.15 Checking the Vehicle After Installation Complete a post-installation check of all vehicular functions. TM9300/TM9400 Installation Guide Installing the Radio © Tait International Limited May 2021... -
Page 52: Appendix - Dual Body Programming Instructions
Recommended Dual Body Settings ■ Troubleshooting ■ For required programming application and firmware versions for your radio system, see the “TM9356/TM9456 Getting Started Guide” (MMB-00035-01) TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions © Tait International Limited May 2021... -
Page 53: Connecting A Dual Body System To A Pc
(see “Associated Documentation” on page 6”. The dual graphical-display control head may or may not be supported depending on firmware version. TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions © Tait International Limited May 2021... -
Page 54: Programming A Dual Body System
You cannot select more than one of the same device type (for example, two radio bodies). Repeat steps 1 to 7 and program the other radio body and the control head. TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions © Tait International Limited May 2021... -
Page 55: Recommended Dual Body Settings
TM9356/TM9456 radio systems. If the stun and revive control status types are used, set the equivalent Rx Processing fields to No for all devices. TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions © Tait International Limited May 2021... - Page 56 DMR Tier-3 Trunking. a. Trunked MPT only applies to DMR radios. b. Trunked DMR Tier-3 only applies to DMR radios. TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions © Tait International Limited May 2021...
-
Page 57: Troubleshooting
LEDs on one or both radio bodies flash on and off when powering up the system, optional features (for example, Multi-Body Support) may not be enabled. For more information, please contact your local Tait dealer. TM9300/TM9400 Installation Guide Appendix - Dual Body Programming Instructions... -
Page 58: Tait General Software Licence Agreement
Tait to Licensee with which or for functions or features to the Software provided by which the Software and Documentation is Tait; and (iv) may contain one or more items of licensed for use. software owned by a third-party supplier. The “Documentation”... -
Page 59: Section 4 Limitations On Use
Software with Software Keys issued purposes; provided that Licensee may not oper- by Tait. Tait may provide the Licensee with a ate that copy of the Software at the same time as Software Key for the Software or certain func- the original Software is being operated. -
Page 60: Section 6 Limited Warranty; Disclaimer Of Warranty
Tait demonstrating compli- investigation of the perceived defect reveals that ance with all the foregoing. no such defect in fact exists, Tait may recover its Section 8 TERM AND TERMINATION costs in respect of such investigation from 8.1. -
Page 61: Section 9 Confidentiality
Documentation. Licensee shall beneficiary of this Agreement. pay all Tait costs (on an indemnity basis) for the 11.6. SURVIVAL. Sections 4, 5, 6.3, 7, 8, 9, 10, enforcement of the terms of this Agreement. -
Page 62: Cable Connections
Cable Connections Terminating the Antenna Cable 5/16" 5/32" (8 mm) (4 mm) 9/16" (14 mm) For more information, refer to “Installing the Antenna” on page Power and Remote Speaker Connections 30-50W radio Signal Function AGND Earth return rear view SPK– External speaker –...
Need help?
Do you have a question about the TM9300 Series and is the answer not in the manual?
Questions and answers