Alpha-InnoTec HT 6Split Installation And Operating Manual page 39

8/18 Addition
In this menu we have the option to change settings
for the additional heat (built-in electric module). More
information after selecting " ? ".
Factory setting:
positioning before QN10
binary stepping: inactive
fuse size: 20 A
IMPORTANT
In the case of a lower security (for the main security in the
this will cause a decrease in the device's power.
9/18 Installed slaves
In this menu, it is possible to select slave devices.
More information after selecting " ? ".
Factory setting:
slave 1: active (EB101)
This menu is about creating cascades with heat pumps.
10/18 Docking
In this menu it is possible to edit the device operation
scheme. More information after selecting " ? ".
IMPORTANT
Changing the diagram will cause the device to operate
incorrectly.
HT 6Split
HT 12Split
CAUTION
The above settings regarding the device operating
11/18 Time & date
In this menu, set the current date and time. In addition,
we have the ability to choose the display format and
time zone.
perature of the heating system. More information after
selecting " ? ".
Factory setting:
temperature of the heating system. More information
after selecting " ? ".
Factory setting:
+ 35 for surface heating,
+ 55 for radiator heating.
14/18 Heating curve
In this menu it is possible to edit the heating curve
formation after selecting " ? ".
Factory setting:
Heating curve: 7
Detailed information on curve settings - see pt. "User
settings".
-
-
Chapter 9 | Control 39