Advertisement
8 Control - Introduction
Display unit
Display
A
Instructions, settings and operational information
are shown on the display. You can easily navi-
to set the comfort or obtain the information you
require.
Status lamp
B
The status lamp indicates the status of the con-
•
lights green during normal operation.
•
lights yellow in emergency mode.
•
lights red in the event of a deployed alarm.
OK button
C
•
values/page in the start guide.
Back button
D
•
go back to the previous menu.
•
change a setting that has not been con-
Control knob
E
The control knob can be turned to the right or
•
scroll in menus and between options.
•
increase and decrease the values.
•
change page in multiple page instructions
(for example help text and service info).
HT 6Split
HT 12Split
A
Display
B
Status lamp
C
D
E
F
Switch
G
Switch (SF1)
F
•
On ( I )
•
Standby (
)
•
Emergency mode (
Emergency mode must only be used in the event
of a fault on the control module. In this mode,
and the immersion heater engages. The control
module display is not illuminated and the status
lamp illuminates yellow.
USB port
G
The USB port is hidden beneath the plastic
badge with the product name on it.
The USB port is used to update the software.
)
Chapter 8 |
| Control - Introduction
31
Advertisement
Need help?
Do you have a question about the HT 6Split and is the answer not in the manual?