Table of Contents
Advertisement
TV‐IP602WN ProView Wireless N Pan/Tilt Internet Camera
5
IPView Pro 2.0
This section describes the how to setup a camera using the IPView Pro 2.0 camera monitoring software. To
install IPView Pro 2.0 on a system running Windows, launch the IPView Pro 2.0 installation software on the
installation CD‐ROM and follow the setup instructions. Once the software is installed, the IP Cam Center
camera monitoring utility is ready for use. Add up to 32 network cameras to monitor using the software.
Additional software, IPCam Player software is also installed. The IPCam Player is used for playing recorded
video from cameras that have been configured to save recorded files.
Launching IPView Pro 2.0 for the first time
To launch IPView Pro 2.0, double click the IPView Pro shortcut on your desktop after installation or click
Start > Programs > TRENDnet > IPView Pro 2.0 > IPView Pro 2.0. If this is the first time using the software,
the menu that appears is the Add camera menu:
56
Advertisement
Table of Contents
