Table of Contents
Advertisement
TV-IP522P ProView Megapixel Internet Camera
5
IPView Pro 2.0
This section describes the how to setup a camera using the IPView Pro 2.0 camera monitoring
software. To install IPView Pro 2.0 on a system running Windows, launch the IPView Pro 2.0
installation software on the installation CD-ROM and follow the setup instructions. Once the
software is installed, the IP Cam Center camera monitoring utility is ready for use. Add up to 32
network cameras to monitor using the software. Additional software, IPCam Player software is also
installed. The IPCam Player is used for playing recorded video from cameras that have been
configured to save recorded files.
Launching IPView Pro 2.0 for the first time
To launch IPView Pro 2.0, click Start > Programs > TRENDnet > IPView Pro 2.0 > IPView Pro
2.0. If this is the first time using the software, the menu that appears is the Add camera menu:
48
Advertisement
Table of Contents
