TRENDnet TV-IP121WN User Manual page 7

- Infrared LEDs: It allows your camera to capture clear images in a dark
environment.
- Lens: Adjust the focus by rotate outside of the Lens.
- Light Sensor: It is used to trigger on and off the Infrared LEDs
according to the environmental light level.
- Power LED: A steady orange light indicates the camera is powered on.
- Link/Act LED: A blinking green light indicates the camera's network
connection correctly.
- WPS Button: A push button to help you to connect camera to your
secured wireless network.
- Detachable Antenna: The detachable external antenna allows you to
adjust its position to obtain the maximum signal.
- Camera Stand Connector: Connects the camera with the camera
stand.
- Power Connector: Connects the AC power adapter to supply power to
the camera.
- LAN Port: It is used to connect the network RJ-45 cable, which
supports the Auto-MDIX so that the camera can detect the network
speed automatically.
- Reset Button: Rest will be initiated when the reset button is pressed
once. The power LED begins to flash.
Factory Reset will be initiated when the reset button is pressed
continuously for three seconds or when Power LED begins to light up.
Release the reset button and the Power LED will begin to flash.
- 6 -