Ddns Setting - TRENDnet TV-IP121WN User Manual

Subnet Mask
Default Gateway
Primary/
Secondary DNS
- PPPoE: Select this option when you use a direct connection via the
ADSL modem. You should have a PPPoE account from your Internet
service provider. Enter the User Name and Password. The camera
will get an IP Address from the ISP as starting up.
NOTE Once the camera get an IP address from the ISP as starting up, it
automatically sends a notification email to you. Therefore, when
you select PPPoE as your connecting type, you have to set up the
email or DDNS configuration in advance.
 DDNS Setting
With the Dynamic DNS feature, you can assign a fixed host and
domain name to a dynamic Internet IP address. Select the Enable
option to enable this feature. Then, select the Provider from the pull-
down list and enter the required information in the Host Name, User
Name, and Password boxes. Please note that you have to sign up for
DDNS service with the service provider first (Please refer to Chapter 6
for detail information.)
 UPnP
The camera supports UPnP (Universal Plug and Play), which is a set of
computer network protocols that enable the device-to-device
interoperability. In addition, it supports port auto mapping function so
that you can access the camera if it is behind an NAT router or firewall.
Select the Enable option to enable this feature.
 Ports Number
- HTTP Port: The default HTTP port is 80.
Enter the Subnet Mask of the camera. The
default setting is 255.255.255.0.
Enter the Default Gateway of the camera. The
default setting is 192.168.10.1.
DNS (Domain Name System) translates domain
names into IP addresses. Enter the Primary DNS
and Secondary DNS that are provided by ISP.
- 33 -