Configuring The Ip Address Of The Pc - TRENDnet TV-IP121WN User Manual

3.3 Configuring the IP Address of the PC

If you failed to access the camera, please check the IP address of your
computer. The IP camera and computer's IP address must be in the same
segment in order to communicate. Below is the procedure to change your
computer's IP address.
1. On your computer, click Start > Control Panel to open the Control
Panel window.
2. Double-click Network Connection to open the Network Connection
window.
3. Right-click Local Area Connection and then click Properties from the
shortcut menu.
4. When the Local Area Connection Properties window appears, select
the General tab.
5. Select Internet Protocol [TCP/IP] and then click Properties to bring up
the Internet Protocol [TCP/IP] Properties window.
6. To configure a fixed IP address that is within the segment of the
camera, select the Use the following IP address option. Then, enter an
IP address into the empty field. The suggested IP address is
192.168.10.x (x
255.255.255.0. The TV-IP121WN default IP address is 192.168.10.30.
7. When you are finished, click OK.
is 0~254 except 30), and the suggested Subnet mask is
- 20 -