TRENDnet TV-IP121WN User Manual page 52

Event Configuration >> Motion Detect Trigger
Select the Enable option to enable the trigger function of the camera, so
that you can send captured images within the detecting area to the FTP
server, or email receiver. You have to configure corresponding settings,
such as FTP server and email server, to enable this feature.
- Schedule Profile: Select a schedule profile from the pull-down list.
- Action: Select the destination that the captured images will be sent
to: Send Email, or FTP Upload.
Event Configuration >> Schedule Trigger
You can separately configure the schedule for trigger function of the
camera by Email, or FTP. Select the Enable option on each item, and then
select a Schedule Profile from the pull-down list and set the Interval time.
- 51 -