TRENDnet TV-IP121WN User Manual page 38

Encryption: Select the WEP option to enable the data encryption
feature to secure the camera within the wireless network.
Format: Once you enable the Encryption feature, you need to
determine the encryption format by selecting ASCII or HEX. ASCII
format causes each character you type to be interpreted as an eight-
bit value. Hex format causes each pair of characters you type to be
interpreted as an eight-bit value in hexadecimal (base 16) notation.
Key Length: Select the WEP key length you use: 64 bits or 128 bits.
WEP Key 1/2/3/4: Enter the WEP key(s) in the following boxes.
If you select WPA-PSK or WPA2-PSK as the Authentication mode,
you need to complete the following settings:
Encryption: Select TKIP or AES. TKIP (Temporal Key Integrity
Protocol) changes the temporal key every 10,000 packets to insure
much greater security than the standard WEP security. AES
(Advanced Encryption Standard) is used to ensure the highest
degree of security and authenticity for digital information.
Pre-Shared Key: This is used to identify each other in the network.
Enter the name in the box, and this name must match the Pre-
shared key value in the remote device.
- 37 -