supports WPS, you can directly build a WPS connection between the
camera and the device by simply pressing its WPS button.
- PBC Mode: The PBC (Push Button Configuration) mode builds the
connection by scanning the devices in the wireless network. Once
you press the camera's WPS button, it starts to scan the WPS
devices in the wireless network, and then you can build the WPS
connection by clicking the Connect button.
Device Status
Display the WPS configuration of the camera.
TIP
The Power LED indicates the WPS connection status by:
- blinking 3 times when the connection is built successfully.
- repeatting 3 times of short-short-long blink when the
connection is failed.
- 39 -