Refco TAP Installation And Operating Manual page 12

English
Buttons and functions on TAP Pressure Gauge
ON by short pressing < 1 sec. OFF by pressing ≥ 1 sec.
ON / OFF
- Backlight on
- Start image on
Backlight ON/OFF
Only in system On-modus by short pressing [ON] < 1
sec. (Backlight shuts off after 1 min.)
Auto Off
- Factory default auto off time = 20 min.
UP by short pressing < 1 sec. MENU by pressing ≥ 1 sec.
UP /
MENU
- To scroll up
DOWN by short pressing < 1 sec. SET by pressing ≥ 1 sec.
DOWN /
SET
- To scroll up
Indicator
LED light
green
Online
Slider
switch
- Wireless transmission
Measurements transmitting
continuous to smart device.
- LED light on.
- Wireless connection to
smart device is active.
- To use TAP with smart
device.
Note:
Wirless transmission between temperature clamp and
pressure gauge remains always on. Pressure gauge
always receives signal from temperature clamp if
within 10 m / 33 ft of each other.
12
Instruction Manual TAP / Temperature And Pressure Gauge
ON / OFF
(Backlight shuts off
after 1 min.)
Online
to smart device on
Scroll UP
MENU
- Display shows "OFF"
- Backlight off
- Display off
- To enter menu mode
- To escape from
last set menu
- To confirm selection
Offline
OfÒine
- Wireless transmission
to smart device off
No measurements trans-
mitting to smart device.
- LED light off.
No wirless connection to
smart device.
- To use TAP without smart
device.
- To safe battery life.
Scroll DOWN
SET