Refco Refmate Quick Manual

Quick Guide to REFMATE

Getting started - Start up and

refrigerant choice

Switch on

Reset pressure to 0 bar(g) by pressing at least 3 s

Choose refrigerant

Close valves and attach hoses

Change from analog to digital screen

REFCO Manufacturing Ltd.

Industriestrasse 11

6285 Hitzkirch - Switzerland

and wait until device has started up

Tel.: +41 41 919 72 82

Fax: +41 41 919 72 83

and confirm

info@refco.ch

www.refco.ch

Certified:

ISO 9001 / 14001

Table of Contents

Need help?

Do you have a question about the Refmate and is the answer not in the manual?

Page 1 Quick Guide to REFMATE Getting started - Start up and refrigerant choice Switch on and wait until device has started up Reset pressure to 0 bar(g) by pressing at least 3 s Choose refrigerant and confirm Close valves and attach hoses Change from analog to digital screen REFCO Manufacturing Ltd.
Page 2 6-digit number sent to you by email Startup REFMATE and enable Bluetooth in device settings Startup App . It connects to REFMATE Register your device in App device list Scan QR code on device. Your serial number is then automatically registered REFCO Manufacturing Ltd.
Page 3 Refrigerant update Firmware update Drag pointer Important note Guarantee date is set within 5 minutes Remove AA batteries from REFMATE after use Leave SD card in the REFMATE REFCO Manufacturing Ltd. Industriestrasse 11 Tel.: +41 41 919 72 82 info@refco.ch...
Page 4 UP or DOWN ENTRY/ BACK button SELECTION SWITCH ON/OFF button FUNCTION button REFCO Manufacturing Ltd. Industriestrasse 11 Tel.: +41 41 919 72 82 info@refco.ch Certified: 6285 Hitzkirch - Switzerland Fax: +41 41 919 72 83 www.refco.ch ISO 9001 / 14001...