Crestron Flex UC-B30-T Getting Started

Getting Started
The following instructions are intended to expedite a Crestron® Flex conference room solution
deployment by offering essential information and links for installation, configuration, troubleshooting,
and maintenance.
In addition, the Crestron Flex Product Manual
information sheet included with the solution or from the Resources section of the product page.
Pre-Deployment
Before proceeding with the installation, ensure the following pre-deployment checklist and license
requirements are fulfilled.
Pre-Deployment Checklist
Task
Verify
Accounts/Configure
Solution
Confirm Connection
Points
Getting Started — Doc. 9520A
can be accessed by scanning the QR code on the product
Requirement
Microsoft Teams® Rooms
account credentials
Zoom Rooms® account
credentials
Two (2) Gigabit LAN Ports
Notes
Account credentials are required to log in to
Microsoft Teams Rooms. When purchasing a
Crestron Flex solution for use with Microsoft
Teams Rooms, the Microsoft Teams desktop client
is preinstalled on the UC-ENGINE.
For guidelines on configuring accounts for
Microsoft Teams Rooms,
for Microsoft Teams Rooms.
When purchasing a Crestron Flex solution for
Zoom Rooms, the Zoom Rooms desktop client is
preinstalled on the UC-ENGINE.
For guidelines on how to configure accounts for
Zoom Rooms, visit Setup &
Zoom Rooms Help Center.
Ensure the installation space has two available
gigabit LAN ports connected to the same VLAN on
the same network.
visit Configure accounts
Configuration in the
Crestron Flex • 1