Table of Contents
Advertisement
11Mbps Wireless LNA Access Point User's Manual
The General Setup Tab
The General Setup tab will display the AP name, and enable you change the AP name and
password. If AP name or password had been changed, you need to click Save button to
store new settings.
Reset AP
The function of this button is same as the hardware RESET Button on the front panel of
Access Point. Click this button will re-boot Access Point.
Restore Default
Click this button to restore the Access Point default settings. Any setting you may have made
through the AP Manager will be lost if this button is clicked.
Download
This button is used for firmware upgrade capability. If you click the download button
to upgrade firmware, the Access Point will reboot automatically after download
process.
18
Advertisement
Table of Contents
