Etherma ET-DUO-PLUS Assembly And Operating Instructions Manual page 20

2 . I N S T A L L A T I O N I N S T R U C T I O N S
When fitting one ET-DUO-PLUS radiator in a
bathroom these instructions have to be ac-
complished:
• Do NEVER install an ET-DUO-PLUS in Volume 1.
• Do NEVER install an ET-DUO-PLUS in Volume 2 if the
user may have access to it from the shower or bath-
tub.
• Do NEVER install an ET-DUO-PLUS under a wall so-
cket.
• Wall socket has to be placed behind, beside or below
the radiator.
The radiator includes a mounting kit with the required
hardware:
20
These two parts have to be assembled before
fixing them to the wall. Please note the bore
in the lower part.
Bottom part of the radiator has to be screw
mounted also to this vertical bracket.
The wall plugs supplied with the mounting kit
cannot be used on dry walls. For this type of
wall, special wall plugs must be used.