Table of Contents
Advertisement
Open or Shared Key
Open System and Shared Key require the user to set a WEP key to exchange data with other
wireless clients that have the same WEP key. WEP is considered basic level of wireless
encryption, if you would like higher security connection, WPA2 encryption is recommended.
• Default Key: select one of the 4 keys to use.
• Network Key: choose the encryption way, either in HEX or ASCII formats, and enter
the password in the blank space.
• Key Length: select 64 or 128 bits as the length of the keys
Key Format: HEX or ASCII
Key Length
Type
64-bit
128-bit
WPA-PSK / WPA2-PSK
If using the WPA-PSK/WPA2-PSK authentication method, please select the Encryption type
for TKIP or AES then enter the Passphrase key. The minimum length is 8 characters.
WPA EAP-TLS
If using the WPA/WPA2 EAP-TLS authentication method, please select the Encryption type for
TKIP or AES then select the WPA/WPA2 Certificate from drop down list.
Available Network
This screen allows the user to scan for available wireless network. It also allows the user to
establish wireless communications with an target device.
Hex
characters 0-9, A-F, a-f
10 characters
26 characters
10
ASCII
alphanumeric format
5 characters
13 characters
Advertisement
Table of Contents
