Hotspot Detector Hardware; Charging Tew-429Uf; Identifying Components - TRENDnet TEW-429UF User Manual

This section explains the hardware section of the TEW-429UF.
Charging the TEW-429UF
The TEW-429UF is powered by a rechargeable battery. The battery must be charged before first
use as follows.
Most notebook computer USB connectors are horizontal.
The TEW-429UF should be connected with the display
facing up. If the USB connector on your computer is
vertical, connect the TEW-429UF carefully to avoid
CAUTION
damaging the connectors.
1. Remove the cap from the
TEW-429UF.
2. With the display facing up,
insert the TEW-429UF into a
USB connector on your
computer.
The icon on the LCD
screen indicating the battery
is charging.

Identifying Components

The illustration below shows the buttons and LEDs on the TEW-429UF.
27
Seek
Seek LED Power
HotSpot Detector
Next
Power LED