TRENDnet TEW-429UF User Manual page 30

1. At WPA or WPA2 security mode, click Configure button next to Authentication Protocol.
2. Select Inner PEAP protocol.
3. Click Save to finish and return to the previous screen.
4. Type in a unique User ID and Password under User Information.
5. If your network uses a user server certificate click Configure Certificate (see Note below).
The following window appears:
Use user certificate
Validate server certificate
Server name:
Server name should match exactly
6. Click OK to apply the settings.
24
Check this box if your network
requires user certification and then
select the certificate from the drop-
down menu.
Check this box if your network
requires server certification and then
select the certificate authority from the
drop-down menu.
Type in the name of the server that is
used for 802.1X authentication.
Check this box if the server name should
exactly match the name in the certificate.