1. Before You Start System Requirements 1. USB enabled computer 2. 300 MHz processor and 128 MB of memory (Recommended) 3. A minimum of 20MB of hard disk space. 4. CD-ROM drive 5. 802.11g or 802.11b Access Point (for Infrastructure Mode) or another 802.11g wireless adapter (for Ad-Hoc/Peer-to-Peer networking mode).
USB port. 2. Click Install Utility & Driver. 3. Click Next for each installation step and click Install. Note: TRENDnet's Wireless Adapters have been fully tested under all supported Windows Operating Systems and have been approved for their functionality. English...
3. Using the Wireless Adapter Note: We recommend that you restart your computer before using the TEW-429UF. 1. Double-click the wireless icon on your system tray. 2. Click Site Survey, click Refresh, and select the desired access point. Click Connect.
Troubleshooting I completed all the steps in the quick installation guide, but my wireless USB Adapter isn't connecting to my access point. What should I do? First, you should verify that the Network SSID matches your wireless router or access point's SSID. Second, you should check your TCP/IP properties to ensure that Obtain an IP address automatically is selected.
Need help?
Do you have a question about the TEW-429UF and is the answer not in the manual?
Questions and answers