TRENDnet TEW-429UF User Manual page 27

4. Click Configure. The WEP Configuration screen appears.
WEP Method
Authentication
Make Key using Pass-
Phrase
Manual Input (ASCII)
Manual Input (HEX)
Default Key
21
Select the encryption to match your access point: 64, 128, or 256-bit. The
encryption level must match the encryption level used by your access
point.
Options are Auto, Open System, and Shared. For most installations
choose Auto.
A WEP Key is automatically generated as you type in any Passphrase of
your choice. Use this feature when you have used a Passphrase to
generate your WEP key on your access point.
Generate your own WEP Key (4 keys maximum) using ASCII characters
(5 characters for 64-bit, 13 characters for 128-bit, 26 characters for
256-bit)
Generate your own WEP Key using hexadecimal characters (10
characters for 64-bit, 26 characters for 128-bit, 52 characters for 256-bit).
Four keys are used for decryption; you have to choose a default key from
them for encryption. Make sure access point uses same WEP key.