Table of Contents Table of Contents English ..................... 1. Before You Start ................How to Install ..................3. Wireless Configuration ..............Troubleshooting ..................Version 04.28.2006...
1. Before You Start Package Contents TEW-424UB Utility & Driver CD-ROM Quick Installation Guide System Requirements USB port: 1.1 or 2.0 CD-ROM Drive CPU: Intel Pentium 300MHz or above Memory: 32MB RAM or above Windows XP/2000/ME/98SE Application Workstation with 54Mbps Wireless USB 2.0 Adapter...
2. How to Install Important! DO NOT install the USB adapter in the computer until instructed to do so. Note: Refer to the User's Guide on the Driver CD-ROM for Windows 98SE and Windows ME installation instructions For Windows Users 1.
Page 5
4. Click Finish. 5. Connect the wireless adapter to an available USB port on your computer. 6. Click Install the software automatically (Recommended) and then click Next. English...
Page 6
7. Click Continue Anyway. 8. Select the appropriate country domain and then click OK. 9. Click Yes. 10. Click Finish. English...
Page 7
Windows 2000 11. Click Yes. 12. Click Finish. 13. Connect the wireless adapter to an available USB port on your computer. English...
Page 8
OK. 16. Click Yes. Your installation is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.com...
Connect. Wireless configuration is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD- ROM or TRENDnet's website at www.trendnet.com...
Please refer to the User's Guide included on the Driver CD-ROM. If you still encounter problems or have any questions regarding the TEW-424UB, please refer to the User's Guide included on the Utility & Driver CD-ROM or contact Trendnet's Technical Support...
Page 11
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.