Working With Profiles; Creating A Profile - TRENDnet TEW-429UF User Manual

The Link Information pane provides information on your current connection. This same pane is
shows at the bottom of all screens so you are always aware of your connection status.
NOTE

Working with Profiles

A profile is a record of the configuration you use to connect to a particular access point. Without
profiles, you would have to reconfigure the TEW-429UF each time you change access points.
Using the Profile screen you can configure the TEW-429UF to access your home network and your
office network. Each configuration is saved as a profile. Then when you go from the office to your
home you just select the appropriate profile.
NOTE
C P
REATING A ROFILE
Refer to the following to add a profile
1. Click Profile.
W TEW-429UF
HEN THE
W
SETTINGS IN THE IRELESS
BUTTONS THAT ARE NOT AVAILABLE ARE GRAYED OUT.
Y
OU CAN CHANGE PROFILES WITHOUT REBOOTING YOUR COMPUTER.
WHEN WALKING FROM ONE ACCESS POINT TO ANOTHER WITHIN YOUR OFFICE.)
W C
YOU USE INDOWS ONTROL PANEL TO CONFIGURE YOUR CONNECTIONS, YOU
MUST REBOOT THE COMPUTER WHEN CHANGING ACCESS POINTS.
IS NOT CONNECTED TO YOUR COMPUTER, MOST
C U
LIENT TILITY ARE UNAVAILABLE.
S
ETTINGS OR
(P
ERHAPS
I
F
3