Table of Contents Table of Contents English ..................... 1 1. Before You Start ................2. How to Install ..................3. Wireless Configuration ..............Troubleshooting ..................Version 12.05.2007...
1. Before You Start Package Contents TEW-424UB Quick Installation Guide Utility & Driver CD-ROM USB Cable System Requirements USB port: 1.1 or 2.0 CD-ROM Drive CPU: 300MHz or above/ 800MHz or above (Windows Vista) Memory: 256MB RAM or above / 512MB RAM or above (Windows Vista) Windows Vista/XP/2000/ME/98SE Application Workstation with 54Mbps...
2. How to Install Important! DO NOT install the USB adapter in the computer until instructed to do so. 1. Insert the Utility & Driver CD- ROM into your computer's CD-ROM Drive and then click Install Utility. Then click on your operating system.
Page 5
For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD-ROM or TRENDnet's website at www.trendnet.com Register Your Product To ensure the highest level of customer service and support, please take a moment to www.trendnet.com/register...
3. Wireless Configuration Note: If you are running Windows XP, you need to disable Wireless Zero Configuration. Please refer to question 4 of the Troubleshooting section. Windows Vista 1. On the bottom right-hand corner of the screen, double-click on the wireless client utility icon.
Page 7
Enter the encryption key and then click Apply. Wireless configuration is now complete. For detailed information regarding the TEW-424UB configuration and advanced settings, please refer to the User's Guide included on the Utility & Driver CD- ROM or TRENDnet's website at www.trendnet.com English...
Then click OK. If you still encounter problems or have any questions regarding the TEW-424UB, please refer to the User's Guide included on the Utility & Driver CD-ROM or contact Trendnet's Technical Support Department.
Page 9
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.