Download
Share
Print this page
TRENDnet TEW-424UB User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Adapter
  5. TEW-424UB
  6. User manual

TRENDnet TEW-424UB User Manual

Wireless g usb adapter
Hide thumbs Also See for TEW-424UB:

Advertisement

Quick Links

Download this manual

Advertisement

loading
Need help?

Need help?

Do you have a question about the TEW-424UB and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for TRENDnet TEW-424UB

Summary of Contents for TRENDnet TEW-424UB

  • Page 2: Software Installation

    SOFTWARE INSTALLATION This section will lead you to install the driver and utility of the TEW-424UB on your Apple computer with Mac OS X 10.4/10.5. Before insert the TEW-424UB into USB port of your computer, please install the Utility Program first. Make sure that the TEW-424UB is NOT inserted into the USB slot.
  • Page 3 Mac OS X. 4. Browse the disk of TEW-424UB_MAC_OS_X.dmg then go to the MacOS10.4 or MacOS10.5 folder which Mac OS X version installed on your Apple computer. 5. Double click on the install.pkg to start the installation of the TEW-424UB driver/utility.
  • Page 4 6. Click “Continue” button. 7. Click “Continue” button. 8. Click “Continue” button.
  • Page 5 9. Click “Agree” button. 10. Click “Install” button. 11. Input your password then click “OK” button. 12. The computer will restart when the installation is done, click “Continue Installation” start the software installation.
  • Page 6 13. When install successes, click “Restart” to reboot your computer. 14. Insert the TEW-424UB on your Mac after it’s rebooted, you will found the “WLAN Client Utility” icon in the Dock menu. Click on the icon start the TEW-424UB configuration.
  • Page 7 2. Type in your password in Terminal windows then press “return/enter” key. 3. Finish the dirver/utility un-installation.

  • Page 8: Station Mode

    CONFIGURATION The TEW-424UB for Mac OS X driver/utility supports two operation mode, either Station mode or Access point mode, select the Station mode using the TEW-424UB on your computer to connect to an access point; Otherwise, select the Access point...
  • Page 9 Profiles The user can create and manage the created profiles for home, work or public areas. Add: Adds a profile. The following screen will appear. The user can enter the necessary information required for accessing Access Points or Wireless Router. Edit: View and edit the existing profile.
  • Page 10 802.11b Preamble: Define the preamble type for 802.11b mode. QoS Mode: Enable/Disable the QoS function on the TEW-424UB. PSP Xlink Mode: Emable/Disable the PSP Xlink Mode on the TEW-424UB. Fragmentation Threshold: Type the fragmentation threshold in the text box. If packet transfer error rates are high, choose values between 256 and 2432 until packet transfer rates are minimized.

  • Page 11: Access Point Mode

    Association Table: Shows the connected wireless LAN client in list. Refresh: Click to refresh the association table. Configure: Click to configure the TEW-424UB in AP mode. Configure This screen shows the SSID, BSSID (MAC Address) and connected wireless client list information.
  • Page 12 Channel: Select a transmission channel for wireless communications. The channel of any wireless device must match the channel selected here in order for the wireless device to access the LAN and WAN via the WLAN Router.(When in FCC domain, you could chose ch1~ch11; in ETSI domain, you could chose ch1~ch13) Network Authentication: The authentication type default is set to “OPEN_SYSTEM”.
  • Page 13 TKIP/AES for WPA_PSK and WPA2_PSK Network key: Open System and Shared Key requires the user to set a WEP key...

  • Page 14: Limited Warranty

    Three years If a product does not operate as warranted above during the applicable warranty period, TRENDnet shall, at its option and expense, repair the defective product or deliver to customer an equivalent product to replace the defective item. All products that are replaced will become the property of TRENDnet.