Advertisement
Quick Links
Product Installation Guidelines
Vandal Resistant CP-BS Lead Safe
Sink Set w/ Swivel Upswept Outlet
PRODUCT CODE:
174.55.42.03
For Watermark and/or WELS information of KITS, refer to each individually certified component.
Item Code:
174.55.42.03
Components:
102.52.21.00
174.01.02.01
174.01.02.02
Notes:
1. N/A—Not applicable.
2. * — The item is a KIT.
3. A copy of each component's Installation Instructions can either be downloaded from
www.galvinengineering.com.au or found inside the packaging.
4. Kit components may be purchased separately.
INSTALLATION
INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these
installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements.
Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
Failing to comply with these provisions shall void the product warranty and may affect the performance of the
product.
© Galvin Engineering Pty Ltd
Description
Vandal Resistant CP-BS Lead Safe
Sink Set w/ Swivel Upswept Outlet
®
Clinilever
CP-BS Lead Safe
Swivel Outlet 240 Reach x 80 High Laminar
Vandal Resistant CP Lead Safe
Assembly Cold
Vandal Resistant CP Lead Safe
Assembly Hot
™
Wall Mounted
102.52.21.00
174.01.02.02
™
Wall Mounted
™
Hospital Upswept Wall
™
J/V Wall Top
™
J/V Wall Top
Version 1, 15 July 2024, Page 1 of 2
Version 1, 15 July 2024, Page 1 of 5
174.01.02.01
Watermark
WELS
*
YES
YES
YES
*
YES
N/A
N/A
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Galvin Engineering 174.55.42.03
Summary of Contents for Galvin Engineering 174.55.42.03
- Page 1 4. Kit components may be purchased separately. INSTALLATION INSTALLATION COMPLIANCE: Galvin Engineering products must be installed in accordance with these installation instructions and in accordance with AS/NZS 3500, the PCA and your local regulatory requirements. Water and/or electrical supply conditions must also comply to the applicable national and/or state standards.
- Page 2 (available from Galvin Engineering) WARRANTY Galvin Engineering products are covered under our Manufacturer's Warranty. Galvin Engineering products must be installed in accordance with the installation instructions and in accordance with AS 3500 and NCC Volume Three, relevant Australian Standards and local authorities applicable to product being installed.
Need help?
Do you have a question about the 174.55.42.03 and is the answer not in the manual?
Questions and answers