Table of Contents
Advertisement
➜
disabling the system without a transmitter
If your remote transmitter is lost or damaged, you can manually
override the system. To do this, you must have the vehicle's igni-
tion key and know where the Valet
check with the installer for the location of the Valet
Location of Valet Button_________________________________
➜
valet mode
You can prevent your system from automatically activating the
Failsafe
®
Starter Kill and locking the doors by using Valet
This is very useful when washing the vehicle or having it
serviced. In Valet
even with the transmitter, but all convenience functions (door
locks, remote start, etc.) will continue to work normally.
10
To disarm the security system,
turn the ignition to the ON posi-
tion. Press and release the Valet
switch within 10 seconds. The
status LED will stop flashing and
the vehicle should start. If the
vehicle does not start, you may
have waited too long; turn the
ignition off and repeat the process.
®
Mode, the starter kill cannot be activated,
®
switch is located. Be sure to
DRW-35
© 2002 directed electronics, inc.
®
switch.
®
Mode.
Advertisement
Table of Contents
