Disarming Without A Transmitter; Remote Siren Silencing; Transmitter Chirp Muting - Directed Electronics Intelliguard 750 Owner's Manual

Hide thumbs Also See for Intelliguard 750:

Table of Contents

disarming without a transmitter

This feature allows you to disarm the system without the transmitter

should it be lost, damaged, or disabled. In order to disarm without a

transmitter, you must have the vehicle's ignition key, know where the

PlainView 2 Valet switch is located, and have the PIN code. Be sure to

check with the installer for the location of the PlainView 2 Valet switch.

Please refer to the Disarm/Valet Mode section of this guide for instruc-

tions to enter the pin code.

This system offers remote siren silencing. Remote siren silencing is a fea-

ture that makes it possible to silence and reset the system when it is

triggering without disarming the system. If the system is triggered and

the siren has been sounding, press

on the transmitter to stop the

trigger and return the unit to the armed state. The system will not dis-

arm, but rather reset. This prevents you from disabling the system

should you wish to silence it without visually checking the vehicle. After

resetting the system, press

again to disarm the system.

To temporarily turn off the arm or disarm chirps, use transmitter chirp

muting. Simply press

on the transmitter, and the confirmation

chirp(s) will be eliminated for that one operation only. The parking

lights will flash to confirm the arm/disarm command. If you want the

arm/disarm chirps turned off permanently, please refer to the User-

Selectable Features section of this guide.

Table of Contents