To lock/arm using your remote
ä
To arm the system press
connected). The LED will begin to flash. The Failsafe® Starter Kill will
prevent the vehicle's starter from cranking if it has been installed. The vehi-
cle's horn (if connected) will honk and the parking lights will flash once to
confirm arming of the system.
To unlock/disarm using your remote
➤
To disarm the system press
connected). The Failsafe
horn (if connected) will honk twice and the parking lights will flash twice.
Disabling the Failsafe
➤
Turn on the ignition. Press and release the Valet
The LED will stop flashing and the vehicle should start.
To remote start the vehicle
➤
Press
and
connected) and the vehicle will start and run for the programmed amount of
time.
To enter or exit Valet
➤
Turn the ignition to the ON position. Turn the ignition back off. Press and
release the Valet
if you have entered Valet
The LED will turn off when exiting Valet
To activate Panic Mode
➤
Press and hold
To disable the remote start system
➤
To disable the remote start, move the shutdown toggle switch to the OFF
position.
Location of Shutdown Switch______________________________
Location of Valet Switch___________________________________
QUICK REFERENCE GUIDE
for one second. The doors will lock (if
for one second. The doors will unlock (if
®
Starter Kill will be deactivated and the vehicle's
®
Starter Kill without a transmitter
. simultaneously. The parking lights will turn on (if
®
Mode
®
switch within 10 seconds. The status LED will light steadily
®
Mode. To exit Valet
for 1.5 seconds.
®
switch within 10 seconds.
®
Mode, repeat the steps above.
®
Mode.