Table of Contents
Advertisement
Using Web-Based Management
Firmware and Configuration Update
Use Config File: Toggle to Enabled to use the settings in a configuration
text file when the device is reset (rebooted).
Config File Name: The complete path and filename on the TFTP server
for the desired configuration file.
Click on the Save button at the bottom right of the window to save the settings.
Note: After finishing the Update Firmware, you must perform a Factory Reset
to make sure the firmware update is complete.
After the settings have been saved to NV-RAM, they will become the default
settings for the device, and they will be used every time it is powered on, reset
or rebooted. The only exception to this is a factory reset, which will clear all
settings and restore them to the initial values present when the device was
purchased.
Click on the Save Configuration button at the bottom of the window to save
the system settings to NV-RAM.
Save Changes window
47
Advertisement
Table of Contents
