D-Link DG-102SH Manual page 46

Using Web-Based Management
Firmware and Configuration Update
The items on this window are described below:
Software Update Mode: This specifies downloading the image file through
a WAN Link or Lan Link.
TFTP Server Address: The IP address of the TFTP server where the
runtime or configuration file is located. This entry is used only if the
Firmware Update is set to Enable.
Last TFTP Server Address: This is a read-only field that displays the IP
address of the last TFTP server to be accessed.
Firmware Update: Determines whether or not the device will try to look
for a runtime image file on the TFTP server.
File Name: The complete path and filename of the runtime image file on
your TFTP server to be uploaded to the device.
Firmware and Configuration Update window
46