D-Link DFL-1600 User Manual page 328

308
WebUI
:
1. HA Configuration
System High Availability:
Enable High Availability: Enable
Cluster ID: 0 (Select a suitable cluster ID)
Sync Interface: DMZ (In this example we use the DMZ interface as sync
interface)
Node Type: Master or Slave
Then click OK
2. HA Address Pair Configuration
We need to create HA Address Pair objects to store the master and slave IP
addresses.
Objects Address Book
Name: lan-priv-ip (Private IP addresses for LAN interface)
Master IP Address: 192.168.10.2
Slave IP Address: 192.168.10.3
Then click OK
Objects Address Book
Pair:
Name: wan-priv-ip (Private IP addresses for WAN interface)
Master IP Address: 10.4.10.2
Slave IP Address: 10.4.10.3
Then click OK
3. Interface Configuration
Interfaces Ethernet
IP Address: 192.168.10.1
Advanced/High Availability
Private IP Address: lan-priv-ip Then click OK
Interfaces Ethernet
IP Address: 10.4.10.1
Advanced/High Availability
Private IP Address: wan-priv-ip
Then click OK
When the configuration is saved and activated, the firewall will act as
a HA cluster member.
Add
Edit (LAN):
Edit (WAN):
D-Link Firewalls User's Guide
Chapter 29. High Availability
HA IP4 Address Pair:
Add HA IP4 Address