D-Link DFL-1600 User Manual page 158

138
Example:
In the example of authentication address object in
group "users" is used to enable user authentication on "lannet". This
example shows how to configure a user group in the firewall's built-in
database.
WebUI
:
1. User Authentication
LocalUserDatabase:
General
Enter a name for the new "lannet" user group folder:
Name: lannet auth users
Comments: folder for "lannet" authentication user group – "users"
2. lannet auth users
General
Username: Enter the user's account name here, e.g. "user1".
Password: Enter the user's password.
Confirm Password: Repeat the password above to avoid any mis-
styping.
Groups: One user can be specified into more than one group. Enter
the group names here separated by comma, e.g. "users" for this exam-
ple.
Then click OK.
3. Repeat step 2 to add all the "lannet" users having the membership of
"users" group into the lannet auth users folder.
There are two default user groups, the administrators group and the
auditors group. Users that are members of the administrators group are
allowed to change the firewall configuration, while users that belong to the
auditors group are only allowed to view the firewall configuration. Press the
buttons under the Groups edit box to grant these group memberships to a
user.
Configuring the local user database
Local User Databases
Add
Note
D-Link Firewalls User's Guide
Chapter 17. User Authentication
8.1 Address
User:
Book, a user
Add